To upgrade Victoria Combo to software version DR23 with Compact Flash...
IMPORTANT NOTE :
Do not forget to delete or move all result, configuration, measurement and screenshot files from the Victoria Combo unit before the software
upgrade. The upgrade may fail if there is not enough free space.
Download the zip file above corresponding to the last software version to a local folder in your computer and uncompress it to the root folder of your Compact Flash card.
After uncompression, please check that a folder named "install" has been created into the root folder with the upgrade files inside. If not, activate the "preserve structure" or "preserve folder" option in your uncompression tool and try again.
Once the files are uncompressed into the "install" folder the card is
ready to upgrade your Combo unit. Go to Platform
-> Software & Firmware -> Upgrade in the main menu,
then select 'upgrade' action and 'compact flash'
source. Press the 'Apply' button. Put the Compact Flash in the SLOT1 and reboot the unit.
See the following picture:
Installing Remote Control software...
Victoria Combo Launcher
Please, uninstall any previous version and then install the last one.
If your current Victoria Combo Launcher version is 2.30, you don't need to reinstall the application again.
Every Victoria Combo module requires its corresponding module plugin for the remote control which can be found below. Please, click on every module plugin links you need to start the download.
)
)
