The Fibre Identifier is an essential installation and maintenance tool used to identify
power and traffic direction in jacketed or bare fibre without service interruption.
The clamp design allows the tester to detect light in the fibre without damage or
disconnection and with low bending loss.
Quick and easy fibre tracing
| The Fibre Identifier has a rugged design with a set of adaptors for 0.25 mm bare fibre, 0.9 mm, 2.0 mm and 3.0 mm for jacketed fibre as standard. By inserting the fibre into the adaptor head and closing the jaws of the identifier around the fibre, the optical power inside the fibre can be detected. When used in conjunction with a Laser Source capable of modulating the light at a selection of frequencies, errors of fibre identification can be eliminated. |  |
Applications
- Telecom optical installations
- CATV optical installations
- Optical test laboratories
- Fibre optics installation and maintenance
- SDH, SONET, Gigabit Ethernet, CATV, PON / FTTx, Opt LAN
- CWDM / DWDM and out of band testing
- Optical network commissioning
- Quality assurance and acceptance testing
Features
- Efficiently identifies the power without damage to the fibres
- Displays the core power in the fibres
- Low bending loss and highly efficient output
- Detects traffic direction
- Detects modulation frequency
- Easy-to-replace adaptors to match various optical cables
- Mechanical clamp design of adaptor heads to ensure close fit to the fibre without leakage loss
- One-button operation – closing the clamp switches the tester on and the measurements are automatically displayed
| Specifications
- Detector type: 1 mm InGaAs (x2)
- Wavelength range: 800 to 1700 nm
- Power reading: 0 to -50 dBm
- Modulation detection: 270 Hz, 1 kHz, 2 kHz
- Adaptors: 0.25 mm bare fibre, 0.9 mm, 2.0 mm and 3.0 mm
- Signal direction: left/right
- Power supply: one 9 volt Alkaline battery (included)
- Operating Temperature: +60°C to -10°C
- Storage Temperature: +70°C to -25°C
- Dimensions: 195 mm x 30 mm x 27 mm
- Weight: 235g
|
Standard Package
- Tester
- Set of adaptors
- User guide
- Carry case
- Connector cleaning buds
- Battery
|  |
|
|
|